How can electromagnetic compatibility be managed?
Through EMC-optimized consulting and development.

Engineering Services

EMC services incl. test laboratory

At Schaeffler Engineering, EMC is an integral part of the electronics development. In our own EMC laboratory, development-monitoring tests can be carried out from the first prototype design to the series specimen.

EMC-optimized development and consulting

Electromagnetic compatibility (EMC) is an important building block for us, our customers and our partners in developing cost-effective, quality products. Our experience and our own EMC laboratory form the basis for our comprehensive range of services in this field - from EMC consulting to EMC-compliant development and the validation of the finished product.

  EMC laboratory and services of Schaeffler Engineering - available from June on!

Are you planning an EMC test or a CE qualification? Or do you need support regarding specification analyses or test concepts? Then we should talk! You can reach us at:

EMC Services for Automotive Products

In our EMC laboratory, we offer accompanying EMC engineering - either in addition to our electronics development and software development or as a stand-alone service.

Validation of Automotive Products – Our range of services:

  • Support in the creation of test plans and coordination with project partners
  • Preparation of EMC tests (test software development, monitoring setup)
  • Execution of the EMC preliminary tests with subsequent optimization (up to re-design)
  • Monitoring of tests in accredited, external laboratories
  • Test report creation for OEM/end customers

Services for CE-Qualification

Before a product can be brought to the market, a large number of legal or even customer-specific requirements must be observed.

EMC qualification procedure for CE – Our range of services:

  • Advice on validation regulations, e.g. specification analysis, test plan creation
  • Inclusion of the EMC specifications in the circuit development
  • EMC-Review of circuit diagrams and layouts, for example
  • Incorporation of functional safety
  • Preliminary tests in our own EMC laboratory during the development phase
  • Interference elimination
  • Preparation of the validation tests, e.g. test software creation, pre-validation measurement of prototypes

Our EMC Laboratory at the Werdohl site

Laboratory equipment:

  • Absorber hall (9.1 x 4.6 m, 3 m³ test volume, 3 m measurement section)
    • Radiated emission 30...1000 MHz, 1...6 GHz in the structure
    • Radiated interference immunity 80...1000 MHz, 1..6 GHz in the structure
    • Interference voltage, ESD, burst, high frequency on lines, BCI
    • 2 m rotary plate, up to 1 t lifting capacity
    • Compressed air and water connections in the rotary plate
  • Referenced standards: ECE R10, TL 81000, various OEM regulations, EN 61000-6-x, EN 50121-3-2 …

Picture: AlbatrossProjects

Contact Options

   Whether it's an ongoing project where you need EMC expertise, or if you are still in the plan-ning phase of such a project, we are the right partner for you when it comes to EMC consulting and engineering.

Would you like to know more about our experience and core competence in the EMC sector? Then contact us at:

Schaeffler applies cookies to secure an optimal use. With the further use of this website you accept the application of cookies. More information .

Accept